Vertical diagonal flow pump
Vertical diagonal flow pump is a large flow and low head product, suitable for industrial and mining enterprises such as power plants, steel mills, water companies, sewage treatment plants…
Structure and performance
1. Smooth operation, safe and reliable, no vacuum start-up, long service life.
2. The pump is small in size, the foundation occupies less area, the length of the pump below the foundation can be adjusted, and it has strong adaptability.
3. The flow channel is simple and reliable, saving the capital construction investment of the pump room.
4. Reasonable structure, easy assembly and disassembly, easy and simple maintenance and repair.
5. The pump is highly efficient and reduces operating costs.
6. High degree of standardization, strong interchangeability of parts and components.
Flow rate Q: 600~70000m³/h
Head H: 4~70m
Design temperature T: up to 150℃
Large-scale water conservancy and water diversion projects
Water intake from rivers and lakes and cross-regional water diversion
Reservoir drainage and flood control and drainage systems
Cooling water circulation and auxiliary water supply for hydropower stations
Municipal water supply and drainage systems
Raw water lifting and transportation for urban water plants
Inlet/outlet water lifting for sewage treatment plants (materials should be selected according to the corrosiveness of the medium)
High-flow drainage of rainwater pumping stations
Industrial circulation and cooling systems
Circulating cooling water systems for thermal power plants/nuclear power plants (main pumps or auxiliary pumps)
Cooling water transportation for blast furnaces in steel plants
Closed-loop water circulation system for chemical plants
Agriculture and irrigation engineering
Large-scale farmland irrigation (especially low-lift and high-flow requirements in plain areas)
Inter-basin water diversion projects
Ocean and shipbuilding engineering
Water intake and pressurization for desalination plants (corrosion-resistant materials such as duplex stainless steel are required)
Ship ballast water system, port and terminal drainage
Special media transportation
Turbid water with a small amount of particles (wear-resistant impeller or lining is required)
Mildly corrosive liquids (acid-resistant materials such as 316L stainless steel or coating are optional)
|
1800FLK6.9—21.5Ⅰ |
900FLB2.1—11.2Ⅰ |
|
1800——Pump outlet diameter 1800mm |
900——Pump outlet diameter 900mm |
|
F——–Leap code name bsp; & nbsp; |
F———-Leap code |
|
L———Vertical diagonal flow pump |
L———Vertical diagonal flow pump |
|
K———Rotor can be core-pulled |
B———Rotor cannot be core-pulled |
|
6.9———Pump design flow 6.9m³/s |
2.1———Pump design flow 2.1m³/s |
|
21.5———Single-stage design head of the pump is 21.5m |
11.2———Single-stage design head of the pump is 11.2m |
|
Ⅰ———Pump design sequence (no mark for the first design) |
Ⅰ———Pump design sequence (no mark for the first design) |
Related products
-
Rotary kiln incinerator
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
Used Muratec 861 Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
-
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
General Rotogravure Printing Machinegghgh
Contact UsOur Printing Machine is a high-quality printing device that is designed to meet the printing needs of various industries. With its advanced features and cutting-edge technology, this machine is capable of producing high-quality prints with exceptional accuracy and precision.Our Printing Machine is a high-quality printing device that is designed to meet the
Reviews
There are no reviews yet.