Copper twisting machine
Wide range of applications: Suitable for multiple-strand core wires in high-frequency cables, data cables, computer cables, and power cables.
Application Scope:
Designed for multi-core strand winding in high-frequency cables, data transmission cables, computer cables, and power cables.
Production Efficiency:
Equipped with a high-speed rotation system, delivering output capacity up to twice that of conventional vertical models.
Tension Control Performance:
Ensures consistent tension from empty spool to full spool. Belt tension and wire tension remain stable throughout the entire winding process.
Tension Adjustment System:
Tension parameters are set via touchscreen interface and managed by PLC control, maintaining stable performance during start-up, operation, and deceleration.
Wire Arrangement Method:
Features axial traversing system with adjustable lay width and pitch, allowing flexible configuration based on production requirements.
Machine Upgrade:
Latest pull-type cantilever single-strand winding design offers improved winding precision and enhanced product quality.
| Model | JH300 | JH400 | JH500 | JH650 | ||||
| Machine Usage | Apply for bare copper wire、tinned wire、enameled wire twisted | |||||||
| Wire specification | φ0.05-0.26MM | φ0.08-0.45MM | φ0.08-0.45MM | φ0.10-1.0MM | ||||
| Stranding Sec.Area | 0.018-0.478mm² | 0.045-1.431mm² | 0.045-1.431mm² | 0.071-7.069mm² | ||||
| Pitch range | 1.92-24.22mm | 1.59-32.04mm | 4.25-45.52mm | 9.5-125mm | ||||
| Rotate speed | 3500RPM(7000t/min) | 3000RPM(6000t/min) | 3000RPM(6000t/min) | 1600RPM(3200t/min) | ||||
| Change the twist distance | Change the gear | Change the gear | Change the gear | Change the gear | ||||
| Take-up bobbin | φ300mm | φ400mm | φ500mm | φ650mm | ||||
| Power | 4KW | 5.5KW | 7.5KW | 7.5KW | ||||
| Stranding direction | "S"or"Z" direction, Adjustable | |||||||
| Take-up tension | Magnetic powder clutch control | |||||||
| Rolling rings unit | Wire-laying bearing type、 Adjustable layout and spacing | |||||||
| Noise level | Below 70dB | |||||||
| Lifting system | Hydraulic automatic lifting | |||||||
| Brake system | Electromagnetic brake automatic brake when internal and external wire break | |||||||
| Automatic oil injection system | Using an electronic hydraulic oil injection system, the oil injection time can be adjusted properly. There is no need for manual addition of bearing grease. | |||||||
Related products
-
Rotary kiln incinerator
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
NEW GLASS SODA MAKER BEST CARBONATOR(GLASS BOTTLE) NEW ARRIVALS SODA STREAM MAKER HOUSEHOLD SPARKLING WATER MAKER WITH GLASS BOTTLE
Contact UsNEW GLASS SODA MAKER BEST CARBONATOR(GLASS BOTTLE) NEW ARRIVALS SODA STREAM MAKER HOUSEHOLD SPARKLING WATER MAKER WITH GLASS BOTTLE
-
Digital-control Fluid Injection / Filling system
Contact UsFSH-SK10 product series is one of the high efficiency, high precision and high reliability intelligent digital-control dispensing system in high flow. FSH-SK10 is the top choice for automated fluid filling systems and intelligent factory production lines with high-capacity injection pump.
-
FSH-MIC Micro Fluid Injection / Cleaning Pump
Contact UsFSH-MIC high-precision fluid point-to-liquid/cleaning pump integrates the driver chip into the motor, no controller is needed, only external IO signal is needed to trigger, and the point/subassembly can be completed according to the specified program. The system design is flexible, convenient for system integration, and reduce cost.
Reviews
There are no reviews yet.