Stage LED Display Rental product series 500*500 cabinet

https://www.techiegoled.com/Stage-LED-Display-Rental-product-series-500-500-cabinet.html

Product protection

Module multiple protection

Waterproof（IP42）

Crashworthiness（≥5KG）

Dust prevention

Moisture-proof

First layer: PCB copper laying with increased reinforcement

Adopting a multi-layer PCB design, each lamp foot is covered with copper, which is 15% larger than traditional copper plating. At the same time, each copper plating point is reinforced to ensure that the PCB lamp foot solder pads are not easily knocked off.

The shaded areas are regular, and the red areas are upgraded ones

Second layer: Solder and thicken the lamp legs

Through PCB design, the solder pads of the lamp legs are enlarged, and the production process is improved. When using the same specifications of lamps, our lamp foot solder paste usage will be 40% more than traditional ones. Without any subsequent process treatment, the thrust of our indoor 1515 lamp will reach over 2.0kg.

Third layer: Mesh fill process reinforcement

The new grid filling packaging process has once again increased the anti-collision ability of the lamp beads, ensuring that the thrust of each lamp is greater than 5KG. At the same time, the new process will also add functions such as dust-proof, moisture-proof, and rainproof.

Fourth layer: The mask adopts a micro brim design

In the rental application, we have added a micro brim design to prevent scratches on the lamp surface during on-site use and transportation.

Fifth layer: Soft rubber protection at the four corners of the box

The highest point of the box adopts a silicone rubber soft corner protection design, effectively preventing the back of the box from scratching the module light surface during installation

Outdoor stype

Dust and waterproof level: front IP65/back IP54

Indoor type

Dust and waterproof level: front IP42/back IP30

Quick product installation

Independent power box

The power box of each box is a separate module, which allows for quick changes, maintenance, and installation, providing on-site maintenance efficiency.

Post maintenance module

Any module can be replaced from the rear, making it convenient for maintenance personnel to enter and operate, and for more efficient inspection and maintenance.

Install large glass beads inside the box

High thrust glass beads, fast and precise positioning, high precision, good strength, and time-saving and labor-saving installation of the box.

Quick conical lock

Creative splicing

Straight screen splicing

Unlimited connection to horizontal and vertical screens, easy to operate, efficient and direct. Directly lock the version to quickly build a flat large screen, and connect firmly and reliably.

Polygon splicing

CURVED SCREEN SPLICING

The polygonal shape of the box is freely combined.

Splicing of straight and curved screens

Straight edge locks and curved locks can be interlocked, not traditional cross locks, but conical locks have higher strength.

Can adapt to more installation environments.

Arc-shaped screen splicing

CURVED SCREEN SPLICING

The installation of curved locks on the box can achieve assembly at -10, -7.5, -5, -2.5, 0,+2.5,+5,+7.5,+10 degrees,

Arc-shaped screen splicing

CURVED SCREEN SPLICING

Push-pull curved lock for quick and accurate positioning. Supports internal and external curvature and flat splicing, and supports stacking.

Environmental application

MESHFILL PROCESS

Indoor and outdoor music and dance parties, car shows, Spring Festival Galas, press conferences, exhibitions, etc. can all be fully displayed through LED screens, which are widely used.