UGE3776260 Rear Right Video Module Radar for BYD

Product Overview

The UGE3776260 Rear Right Video Module Radar is an integrated automotive sensing component designed for selected BYD passenger vehicles equipped with advanced driver-assistance systems (ADAS). Combining a wide-angle CMOS camera and millimeter-wave radar within one housing, this module supports rear-side imaging, blind-spot detection, rear cross-traffic alert, and lane-change assistance.

Unlike conventional parking sensors that primarily detect nearby obstacles, this multifunctional camera-radar module combines visual information with radar-based object detection. It helps the vehicle monitor surrounding traffic and provides relevant information to the driver through the vehicle's assistance and display systems.

Installed at the original right rear corner position, the UGE3776260 is designed to match the vehicle's original mounting arrangement and electrical harness connection. Its sealed housing helps protect internal components against moisture, dust, road debris, and vibration.

For automotive parts distributors, BYD repair specialists, and new energy vehicle aftermarket suppliers, this product provides a replacement solution for damaged or malfunctioning rear-right ADAS sensing modules.

Key Features of the UGE3776260 Video Radar Module

Integrated CMOS Camera and Millimeter-Wave Radar

The module combines a wide-angle CMOS camera and millimeter-wave radar in a single assembly. The camera captures rear and side images, while the radar detects surrounding objects and supports driver-assistance functions.

This integrated design reduces the need for separate camera and radar housings at the corresponding installation position.

Advanced Driver-Assistance Functions

The rear-right sensing module supports several important vehicle assistance functions:

• Blind-Spot Detection (BSD): Helps identify vehicles approaching or traveling within the driver's blind-spot area.

• Rear Cross-Traffic Alert (RCTA): Supports detection of approaching traffic when the vehicle reverses out of a parking space.

• Lane-Change Assist: Provides information about vehicles in adjacent lanes to support safer lane changes.

• Rear and Side View Imaging: Supplies camera images for compatible surround-view and parking-assistance displays.

Actual feature availability depends on the vehicle's original ADAS configuration and software integration.

Wide-Angle Camera with Anti-Glare Coating

The integrated camera uses a wide-angle optical design to capture the rear-side viewing area. Its anti-glare lens coating helps improve image clarity under different lighting conditions, including low-light environments and rainy weather.

Sealed and Vibration-Resistant Housing

The module features a sealed glass-fiber-reinforced polymer housing designed for automotive exterior installation.

Its protective construction helps resist water, dust, road salt, and vibration. The operating temperature range of -40°C to +85°C supports use under different environmental conditions.

Original-Style Electrical Connection

The UGE3776260 uses an OE-style multi-pin vehicle harness connector and an original-position mounting bracket. This design supports direct replacement without cutting or modifying the original wiring when the vehicle configuration matches.

Plug-and-play hardware compatibility does not eliminate the need for electronic configuration and ADAS calibration after installation.

Product Specifications

Compatible BYD Vehicle Applications

The UGE3776260 rear-right video radar module is designed for selected BYD passenger vehicles equipped with the corresponding blind-spot and rear cross-traffic camera-radar configuration.

Potential applications include:

• BYD Han

• BYD Tang

• BYD Song Plus

• BYD Seal

• BYD Frigate / Fregate (护卫舰) series

• Other compatible BYD passenger vehicle configurations

Compatibility depends on the original vehicle equipment, production version, electrical configuration, and module reference number.

Left-hand and right-hand drive versions may use different part numbers or configurations. Buyers should compare the original module label and provide the vehicle VIN before ordering.

How the Rear Camera Radar Supports ADAS Performance

Blind-Spot Monitoring

Blind-spot monitoring helps drivers identify vehicles that may not be visible through conventional rear-view mirrors. The radar component monitors the relevant adjacent area and supplies detection information to the vehicle's assistance system.

Rear Cross-Traffic Detection

When reversing from a parking space, drivers may have limited visibility of approaching vehicles. The rear cross-traffic alert function uses surrounding-object detection to help identify potential hazards approaching from either side.

Lane-Change Assistance

Changing lanes requires awareness of vehicles traveling in adjacent lanes. The integrated radar supports object detection and provides information for compatible lane-change assistance functions.

Surround-View and Parking Assistance

The CMOS camera captures rear-side images and supplies visual information to compatible vehicle displays. This supports parking assistance and surround-view functions when integrated with the vehicle's original electronic architecture.

Applications in BYD Electric Vehicle Maintenance

ADAS Module Replacement

After a collision or electronic component failure, the original rear-right camera-radar module may require replacement. A correctly matched UGE3776260 assembly provides a replacement option for compatible BYD vehicles.

Electric Vehicle Collision Repair

Rear-corner collisions can damage camera housings, radar modules, mounting brackets, and electrical connectors. Repair workshops need to inspect the complete installation area before replacing the sensing component.

Automotive Parts Distribution

New energy vehicle parts distributors require accurate identification of electronic components across different BYD models and configurations. Part-number verification helps reduce incorrect orders and supports aftermarket inventory management.

Professional ADAS Repair Services

Specialized workshops handling camera and radar replacement need components that match the original vehicle installation. Access to compatible modules supports the repair of blind-spot monitoring and rear cross-traffic assistance functions.

Installation and ADAS Calibration Guidelines

Correct installation and calibration are essential for the performance of the UGE3776260 rear-right video radar module.

Remove the Original Module

Disconnect the vehicle battery according to the manufacturer's service procedure before removing the original component. Access the rear-right mounting position by removing the relevant interior trim or bracket cover.

Check the Mounting Position

Inspect the original mounting bracket, fasteners, and surrounding body structure. Any deformation or damage may affect the camera viewing angle and radar detection alignment.

Connect the Replacement Module

Install the replacement unit using the original mounting arrangement. Reconnect the OE-style electrical harness and ensure the connector locking mechanism is fully engaged.

Perform Mandatory ADAS Calibration

After installation, use the BYD OE diagnostic tool or a compatible ADAS calibration system to complete camera aiming and radar alignment.

The calibration target must be positioned according to the vehicle manufacturer's specified procedure. Accurate alignment is important because an incorrect camera angle or radar orientation may affect detection performance.

Complete System Testing

Clear relevant diagnostic fault codes and check the operation of blind-spot detection, rear cross-traffic alert, and other supported functions. Perform the required functional road test before returning the vehicle to service.

Professional installation by qualified automotive technicians is recommended.

Why Choose Meiruike for BYD Video Radar Modules?

Vehicle-Specific Electronic Replacement Parts

Meiruike supplies automotive electrical and electronic replacement components for different vehicle applications. The UGE3776260 is identified by its specific part number and rear-right installation position, helping buyers verify the intended application.

Support for New Energy Vehicle Aftermarket Demand

As electric vehicles increasingly incorporate camera-based and radar-based assistance technologies, repair businesses need access to compatible electronic replacement components. Meiruike supports aftermarket sourcing requirements for selected BYD applications.

Flexible Order Quantities

With a minimum order quantity of one piece, the product supports individual repair orders as well as larger purchasing requirements from distributors and workshops.

Protective Packaging and Shipping

Each module is packed in an anti-static bag and protected with foam inside a reinforced carton. Lens covers receive additional protective film to reduce the risk of transportation damage.

Bulk orders can be palletized for sea freight, while samples and smaller shipments can be arranged through DHL, FedEx, or UPS with insurance.

Warranty and After-Sales Support

The product includes a 12-month warranty against manufacturing defects. Returns are accepted for unused and uninstalled products in their original packaging, subject to applicable conditions.

The warranty does not cover damage caused by improper installation, failure to perform ADAS calibration, accidents, incorrect vehicle voltage, or improper sealing.

Frequently Asked Questions

What Is the UGE3776260 Rear Right Video Module Radar?

It is an integrated ADAS sensing module for selected BYD vehicles. It combines a CMOS camera and millimeter-wave radar to support blind-spot detection, rear cross-traffic alert, lane-change assistance, and rear-side imaging.

What Is the Difference Between a Video Module and a Conventional Parking Sensor?

A conventional parking sensor primarily detects nearby obstacles. The UGE3776260 integrates a camera and radar, providing both visual imaging and object-detection information for multiple driver-assistance functions.

Which BYD Models Can Use This Radar Module?

Potential applications include selected BYD Han, Tang, Song Plus, Seal, and Frigate series vehicles. Exact compatibility must be confirmed using the original part number, VIN, and vehicle configuration.

Does the Module Support Blind-Spot Detection?

Yes. The integrated millimeter-wave radar supports blind-spot detection in vehicles equipped with the corresponding original ADAS configuration.

Is ADAS Calibration Required After Replacement?

Yes. Camera aiming and radar alignment are mandatory after installation. Use the appropriate BYD diagnostic equipment or a compatible ADAS calibration system following the manufacturer's procedures.

Can I Install the Module Without Modifying the Original Wiring?

The product uses an OE-style connector and original-position mounting design. When the vehicle configuration matches, no wiring modification is required. However, electronic calibration remains necessary.

How Can I Confirm Whether UGE3776260 Fits My BYD?

Check the part number printed on the original module and compare it with UGE3776260. Providing the VIN, vehicle model, production year, and photographs of the original component can help confirm compatibility.

What Is the Warranty Period?

The product includes a 12-month warranty against manufacturing defects. Improper installation and failure to complete the required calibration are among the excluded conditions.

Order UGE3776260 Rear Right Video Module Radar

The UGE3776260 Rear Right Video Module Radar combines camera imaging and millimeter-wave sensing to support essential ADAS functions in compatible BYD vehicles. Its integrated design, original-style electrical connection, and sealed housing make it a replacement option for rear-right sensing modules requiring maintenance or replacement.

Meiruike supplies this BYD video radar module for automotive repair workshops, new energy vehicle parts distributors, and aftermarket buyers. With clear part-number identification, flexible order quantities, protective packaging, and after-sales support, Meiruike helps customers source suitable electronic replacement components for modern vehicle assistance systems.