Gap film laminating machine
Gap film application machine is a high-precision automation equipment, which is mainly used to achieve precise fitting of film, protective film
Function description:
By applying reflective film on the glass, the gaps between the cells and the
strings of the battery components are filled. Through the microstructure on the
substrate, the sunlight in the gaps between the cells is reused by using the
total reflection principle of the glass-air interface, thus improving the
utilization rate of sunlight.
Technical parameters:
| Parameter configuration | |
| Layout | String+piece |
| Size | 6170mm*5000mm*2400mm (length*width*height) |
| Function·Glass longitudinal + transverse gap film | ·Four-sided film ·Module regular glass ·Dual servo drive film |
| Number of film that can be pasted on a string | 7 (14 film heads) |
| Number of film that can be pasted on a piece | 26 (26 film heads) optional |
| Filming accuracy and appearance inspection (optional) | |
| Important parameters·Compatible with 166-230 component versions | |
| Filming cycle | ≤15s |
| Filming accuracy | ±0.2mm |
| Filming yield | >99.5% (actually measured 99.7%) |
| Online/offline filming can be realized | |
| Activity rate | >99.5% (actually measured 99.7%) |
https://www.bluemannsolar.com/Gap-film-laminating-machine.html
Related products
-
Four-axis industrial robot BRTIRPZ1825A
Contact UsFour-axis industrial robot
Arm span: 1800mm
Load: 25kg -
Cost Effective 3-in-1 Car Jump Starter
Contact Us1500A Jump Starter:Reliable power to start your 12V vehicle. 10000mAh Power Bank:Charge your devices on the go. 3W LED Light:Offers Lighting, Strobe, and SOS modes for safety.
-
Hastelloy C-276 Heat Exchanger F=1㎡
Contact UsThe Hastelloy C-276 heat exchanger is a high-performance thermal equipment designed for applications in highly corrosive environments.
-
TEG Cleaning Furnace for Clean Filter Plateand Spinneret in Nonwovens Fabrics Industry
Contact UsThe spinnerets are first placed in a boiling solution containing 15-20%NaOH for 2 to 3 hours to remove most of the polymer on the plate.The plate is placed in a triethylene glycol solution at 260-280C,keeping for 12 hours, and then cooled.






Reviews
There are no reviews yet.