Rotary Kiln Incinerator
The hazardous waste rotary kiln incineration system is a high-temperature thermal treatment solution designed for the safe and efficient disposal of a wide range of hazardous and solid wastes.
Characteristic:
1. It can simultaneously incinerate solid waste, liquids, colloids, and
gases, and has strong applicability to incineration materials;
2. Burning materials are agitated and advanced, with three heat transfer
methods coexisting in one furnace, resulting in a high heat utilization
rate;
3. The transmission mechanism is simple, the transmission mechanism is
located on the kiln shell, and the equipment maintenance is simple;
4. The residence time of up to 1 hour and high temperature above 850 ℃ in the
rotary kiln basically burn out hazardous waste;
5. The strong gas mixing in the secondary chamber causes incomplete
combustion of the unburned substances in the flue gas, reaching the high
temperature (1100 ℃) required for the decomposition of harmful components. The
residence time of the flue gas in the high temperature zone is greater than 2
seconds. Avoiding the working conditions where dioxins are produced from the
source;
6. Good sealing measures and furnace negative pressure ensure that harmful
gases do not leak out;
7. The equipment has a high operating rate, with an annual operating rate
generally reaching 90%; Easy to operate and maintain。
Scope of application: Centralized disposal of hazardous waste, chemical
sludge, oil sludge, chemical kettle residue, waste liquid, etc
Related products
-
FSH-MIC Micro Fluid Injection / Cleaning Pump
Contact UsFSH-MIC high-precision fluid point-to-liquid/cleaning pump integrates the driver chip into the motor, no controller is needed, only external IO signal is needed to trigger, and the point/subassembly can be completed according to the specified program. The system design is flexible, convenient for system integration, and reduce cost.
-
RO water Treatment
Contact UsThe reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a p
-
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
Used Muratec 861 Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
Reviews
There are no reviews yet.