Zwitterionic Polyacrylamide
The zwitterionic polyacrylamide is formed by copolymerization of the cationic monomer, acrylamide monomer, and hydrolysis agent.
The zwitterionic polyacrylamide is formed by copolymerization of the cationic
monomer, acrylamide monomer, and hydrolysis agent. The molecular chain of this
product contains both positively and negatively charged zwitterionic irregular
polymers. Product appearance is white fine particles or powdery solid.
Usage:
It can be used for the sludge dewatering agent, especially in the case of
more complex or constantly changing water quality, sludge dewatering in oil
refineries and chemical plants, and the effect is better. The performance of
this product as a water treatment flocculant to reduce the surface tension is
much greater than the ability of the cationic PAM and anionic PAM to exist alone
under the same conditions.
Specification
|
Appearance |
Solid content(%) |
Degree of cation(%） |
Degree of anion(%） |
Dissolution time (min) |
|
White power |
≥88 |
5-50 |
8-15 |
≤60 |
Related products
-
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
-
KSDC-8606B/B1 Centralized Dust Collector
Contact Us86 series central dust collectors are the second generation of Kaisen centralized dust collector, which is more versatile.
-
RTO regenerative thermal oxidizer for removing VOCS
Contact UsRTO is an air pollution control system which collecting the exhausted air through the safety air valve into the oxidation bed with the temperature over 820℃ to oxidation the organic waste gas into carbon dioxide and water.
It is used
1. Industrial and mining conditions with high and low concentrations of organic solvents in the treatment of emitted gases
2. Industrial and mining conditions with requirements for the collection and treatment of unorganized emissions
3. Equipment conditions without waste heat utilization value -
DF-03 HT Modified Starch
Contact UsDF-03 is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 135 ℃). And ensure its good fluid loss performance under both low and high temperature. DF-03 is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 1.0%-2.0%.
Reviews
There are no reviews yet.