Zwitterionic Polyacrylamide
The zwitterionic polyacrylamide is formed by copolymerization of the cationic monomer, acrylamide monomer, and hydrolysis agent.
The zwitterionic polyacrylamide is formed by copolymerization of the cationic
monomer, acrylamide monomer, and hydrolysis agent. The molecular chain of this
product contains both positively and negatively charged zwitterionic irregular
polymers. Product appearance is white fine particles or powdery solid.
Usage:
It can be used for the sludge dewatering agent, especially in the case of
more complex or constantly changing water quality, sludge dewatering in oil
refineries and chemical plants, and the effect is better. The performance of
this product as a water treatment flocculant to reduce the surface tension is
much greater than the ability of the cationic PAM and anionic PAM to exist alone
under the same conditions.
Specification
|
Appearance |
Solid content(%) |
Degree of cation(%） |
Degree of anion(%） |
Dissolution time (min) |
|
White power |
≥88 |
5-50 |
8-15 |
≤60 |
Related products
-
DF-03 HT Modified Starch
Contact UsDF-03 is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 135 ℃). And ensure its good fluid loss performance under both low and high temperature. DF-03 is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 1.0%-2.0%.
-
Coke Oven Gas Hydrogenation
Contact UsCoke oven gas is a flammable gas produced during the high-temperature, slow dry distillation of coal in the coke production process.
-
Coke Oven Gas Hydrogenation
Contact UsCoke oven gas is a flammable gas produced during the high-temperature, slow dry distillation of coal in the coke production process.
-
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
Reviews
There are no reviews yet.