SKLY Impeller Type Cooler
The counterflow cooler is widely applicable to the cooling of extruded feed, granular material and powder material, cooling air and material counter flow, so that material gradually cool in the direct
The counterflow cooler is widely applicable to the cooling of extruded feed, granular material and powder material, cooling air, and material counter flow, so that material gradually cools in the direction;
It can cool the material to around 5℃ above room temperature after extrusion or pelleting, which can not only harden the particles to prevent cracking but also remove part of the water to prevent mildew;
Adjustable conical material distribution mechanism, uniform distribution, can also be set rotating material sharing mechanism (optional), ensure the cooling material level is same, good cooling effect;
Impeller type discharging structure, soft discharging, low crushing rate of materials, uniform cooling of material;
High degree of automation, with level control function;
Sprocket drive, simple structure, smooth operation.
Related products
-
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
BF500C BF630C High Precision Edm Wire Cut Machine
Contact UsRobust frame with “C” mast.
With height adjustable diamond guider.
Four axes independent (X/Y/U/V) work;
Taiwan linear rail, Grade P or H, Ball screw. C2 or C3.
Special Tensioning mechanism for molybdenum wire, keep stable cutting.
Stepper motor is standard, Servo motor is optional.
Tolerance can keep in 0.005mm, Roughness Ra 0.8. -
FS-V-F240 Injection valve
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
FSH-MIC Micro Fluid Injection / Cleaning Pump
Contact UsFSH-MIC high-precision fluid point-to-liquid/cleaning pump integrates the driver chip into the motor, no controller is needed, only external IO signal is needed to trigger, and the point/subassembly can be completed according to the specified program. The system design is flexible, convenient for system integration, and reduce cost.
Reviews
There are no reviews yet.