Fast Cylinder (Welding Type)
Used for moving small part of machine with high speed.
The fast cylinder plays the role of fast mold transfer in large injection molding machines. Due to the fast running speed, the requirements for straightness are relatively high. The back cover, hinge shaft and cylinder are welded into one piece. Piston rod high frequency treatment.
| Cylinder name | Bore range | Travel range | Rated pressure (Mpa) | Installation method |
| Fast oil cylinder (welding type) | 63～190 | 1100～4800 | 25 | Hinge type + universal bearing |
1. Tie rod type, the front and rear covers are fixed by a tie rod. Limited by
the tie rod, it is generally suitable for small oil cylinders. Although the wall
thickness is the thinnest, under the same specification, the external dimensions
will be too large, and the space waste is serious.
2. Bolt type, the front and rear covers and the cylinder barrel are connected
by bolt groups. The required thickness of the cylinder is the largest, and the
raw materials are relatively wasteful. Generally suitable for large
cylinders.
3. Threaded type, the front and rear covers and the cylinder barrel have
large threads, and are connected by threads. The required thickness is smaller
than the bolt type, but it is still thicker, and a large nut is required to
ensure the assembly direction. Generally suitable for large long cylinders
4. Welding type, the back cover and the cylinder are welded into a whole, the
wall thickness of the cylinder is relatively thin, and the whole is relatively
compact. The material cost is not high, but the processing is the most difficult
and the processing cost is the highest.
Related products
-
ATLAS COPCO 3002600380 AIR/OIL FILTER KIT
Contact UsWe are ATLAS COPCO 3002600380 AIR/OIL FILTER KIT supplier and provide replacement parts for major air compressor manufacturers. Please feel free to contact us at henry.guan@foxmail.com with any questi
-
ATLAS COPCO 1629095101 STRAINER
Contact UsWe are ATLAS COPCO 1629095101 STRAINER supplier and provide replacement parts for major air compressor manufacturers. Please feel free to contact us at henry.guan@foxmail.com with any questions of the
-
EI-lamination with air gap
Contact UsThe gap sizes of transformer lamination core can be customized.
-
EI Lamination
Contact UsEI lamination is made by the silicon steel strip. The model of EI lamination in standard sizes is from EI-28 to EI-240, and the model of EI lamination in non-standard sizes is from EI-36 to EI-360.
Reviews
There are no reviews yet.