https://www.xizi-ec.com/FSGJ30D-Progressive-type-safety-gear-Single-lift.html
Type:FSGJ30D
Rated load range(P+Q)(kg):900~3600
Rated speed range(m/s):0.25~2.5
Activation speed range(m/s):0.32~3.23
Guide rail width(mm):10、15.88、16
Lift mode |
Bottom beam mounting interface dimensions |
||||||
A |
B |
C |
E |
F |
D1 |
D2 |
|
Left Side lift |
33.5 |
118 |
71 |
48 |
30 |
4×M16 |
2×Φ12 |
Related products
-
LFQ1300 Micro Computer Controlling Slitting Machine
Contact UsLFQ1300 Micro Computer Controlling Slitting Machine
-
BF500C BF630C High Precision Edm Wire Cut Machine
Contact UsRobust frame with “C” mast.
With height adjustable diamond guider.
Four axes independent (X/Y/U/V) work;
Taiwan linear rail, Grade P or H, Ball screw. C2 or C3.
Special Tensioning mechanism for molybdenum wire, keep stable cutting.
Stepper motor is standard, Servo motor is optional.
Tolerance can keep in 0.005mm, Roughness Ra 0.8. -
Rotary kiln incinerator
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
Used Muratec 861 Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .
Reviews
There are no reviews yet.