KSDM-4.0 Downdraft Grinding Dust Collector
Features:
● Low noise
● Stable performance
● Easy operation and use High purification efficiency
● Meeting indoor emission standards Reasonable structure design
● Low resistance loss
Introduction:
The downdraft grinding dust collector can realize the working mode of bottom suction to absorb and purify the dust generated during the polishing process. The front bottom suction is set according to the physical characteristics of the dust. The combination of top air supply and bottom suction can not only achieve the purpose of absorbing dust, but also bring fresh breathing air to the staff, thereby effectively protecting the working environment of the staff.
Parameters:
| Model | KSDM-4.0 |
| Inlet Air Flow | 4000±200m³/h |
| Motor Power | 4kW |
| Power Supply | 3x380V/50Hz |
| Filter Material |
Spunbond polyester |
| Filtration Area | 24㎡ |
| Filtration Efficiency | ＞99.9% |
| Filtration Precision | ≥0.3μm |
| Filter Cartridge | 2 Pcs |
| Cleaning Method |
Automatic cleaning |
| Compressed Air | 0.5~0.6MPa |
| Noise Level | ≤75±5 dB(A) |
| Dimension (WxDxH) | 1600×1150×1900mm |
| Working table (WxDxH) | 1515×1000×850mm |
| Weight | 650±15kg |
Options & Accessories：
Independent electric control cabinet
Frequency converter
Explosion proof device
Anti-static filter cartridge
Cellulose filter cartridge
Applications：
Downdraft grinding dust collector
Customized grinding dust collector
ATEX grinding dust collector case
Related products
-
DF-03 HT Modified Starch
Contact UsDF-03 is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 135 ℃). And ensure its good fluid loss performance under both low and high temperature. DF-03 is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 1.0%-2.0%.
-
Hob
Contact UsIt is used Can-making/Metal sheet Painting and Printing Ovens. According to the specifications of the printed and coated products, a large number of C-shaped buckles and rollers (made of specialized food grade imported materials) are installed on the inner bracket and edge ears of the wicket, allowing the sheet (aluminum plate) to dry and run in a separate state from the wicket, effectively avoiding the problem of dot shaped scratches and burns in the printed and coated products.
-
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
-
Zwitterionic Polyacrylamide
Contact UsThe zwitterionic polyacrylamide is formed by copolymerization of the cationic monomer, acrylamide monomer, and hydrolysis agent.
Reviews
There are no reviews yet.