Leading Manufacturers of Temporary Mobile Charging Equipment for Events, Emergencies and Logistics Peaks
MPMC BCH-275-200 mobile BESS charger was moved to its designated location for operation, demonstrating its user-friendly operation.
Temporary charging needs arrive quickly and end just as fast: a festival, a film shoot, an emergency response, a construction phase, or the seasonal peak when a logistics depot runs extra electric trucks. MPMC’s BCH Series mobile BESS charger delivers high-capacity, clean and silent power for each of these situations, then moves on to the next assignment. For European rental companies, event-service providers, municipalities and logistics operators, one flexible fleet of BCH units can cover all of these needs.
Clean, Silent Power Wherever It Is Needed
Storage and Charging in One Mobile Unit
A BCH unit stores energy from the grid, a generator, battery storage or solar PV and delivers it as fast DC charging for electric cars, trucks and machinery, together with AC power for lighting, stages, cabins and equipment. Battery output is quiet and emission-free at the point of use, which suits city-centre events, residential areas and sites with strict environmental rules. Units can be charged in advance at the depot and arrive at the venue ready to work.

MPMC BCH-80-70 mobile BESS charger, a compact 80 kW unit for light temporary charging and power.
Extra Capacity for Peak Seasons at Logistics Depots
European parcel and freight operators see sharp seasonal peaks, when extra electric vans and trucks run longer shifts. Rather than sizing a permanent installation for a few busy weeks, a depot can bring in BCH units for the peak and return them afterwards. High-power models deliver up to 600 kW of DC charging through dual CCS2 guns, and large depot yards make placement straightforward.
Fast Mobilisation and Demobilisation
Each BCH reaches full operational status within 24 hours of arrival. The 880 kg BCH-80-70 moves easily around a site, the BCH-275-200 travels on a 3.5-tonne trailer, and the larger models arrive as single heavy-duty units, so equipment can be set up for a weekend event or a peak season and returned to the yard straight afterwards.
Table 1. Temporary applications for the BCH Series
|
Temporary application |
BCH capability |
Benefit |
|
Festivals and outdoor events |
Silent battery output; AC and DC power from one unit |
Clean power within noise and emission limits |
|
Film and broadcast |
Quiet operation; flexible AC output |
No generator noise during recording |
|
Emergency response |
Full operation within 24 hours; multiple energy inputs |
Fast power and vehicle charging where it is needed |
|
Peak-season depot charging |
Up to 600 kW DC through dual CCS2 guns |
Extra electric truck capacity for busy weeks |
|
Construction phases |
Trailer or heavy-duty formats; grid, genset or solar input |
Charging that moves with the work |
|
Electric vehicle demonstrations |
Plug-and-play set-up at any venue |
Real charging at dealer test-drive and handover events |
One Asset, Many Assignments Across the Year
Higher Utilisation for Rental and Event-Service Companies
The BCH is a multi-functional asset that can be redeployed as demand changes: machinery charging on a construction site one month, event power the next and extra depot capacity during the logistics peak. For rental companies and event-service providers, that flexibility keeps equipment working across the whole year and strengthens the return on every unit. MPMC’s BCH revenue model also supports premium pricing for off-grid and emergency charging, adding income on every temporary assignment.

MPMC BCH-275-200 mobile BESS charger was moved to its designated location for operation, demonstrating its user-friendly operation.
Table 2. BCH formats for temporary deployments
|
Model |
DC charging |
AC output |
Weight |
Transport |
|
BCH-80-70 |
80 kW |
– |
880 kg |
6 units per 20′ GP; 14 per 40′ HC |
|
BCH-275-200 |
150 kW |
125 kW |
2,800 kg |
3.5 t trailer; 4 units per 20′ GP |
|
BCH-600-400 |
400 kW |
200 kW |
8,300 kg |
1 per 20′ GP; 3 per 40′ GP |
|
BCH-800-600 |
600 kW |
200 kW |
15,000 kg |
1 per 20′ GP |
|
BCH-500-1000 |
500 kW |
500 kW |
19,800 kg |
20′ GP container format |
Built for Repeated Transport and Set-Up
Temporary work means frequent loading, transport and set-up, so the BCH is built to take it. Blade LFP battery packs use a high-strength sandwich structure tested for fire, water immersion, high-impact collision and crushing; packs are sealed and liquid-cooled to keep dust out; and BCH-275-200 and larger models carry C4 anti-corrosion coating and CE-certified aerosol fire protection. Every unit is rated for 6,000 cycles at 90% depth of discharge, giving rental fleets a long working life across many seasons.
Planning a Temporary Deployment With MPMC
MPMC supports rental companies, event-service providers and emergency planners with model selection, commissioning and remote monitoring through each unit’s 4G EMS.
Information to Share
• The type of event, site or peak period and its duration
• Vehicles and equipment to be charged or powered
• Energy sources available on site: grid, generator or solar
• Access, transport and set-up time at each location
• Contact MPMC at sales@mpmc-china.com or WhatsApp +86 150 0085 4420 for a deployment plan
Related products
-
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
FSH-FMI2020-A Standard Single Double Channel Fluid Injection
Contact UsFSH – FMI2020 – A standard series is the high-precision fluid dispensing / refilling system consisting of a digital control box, stepper motor and one to two high precision rotary ceramic pump modules driven by step motor.
-
BF500C BF630C High Precision Edm Wire Cut Machine
Contact UsRobust frame with “C” mast.
With height adjustable diamond guider.
Four axes independent (X/Y/U/V) work;
Taiwan linear rail, Grade P or H, Ball screw. C2 or C3.
Special Tensioning mechanism for molybdenum wire, keep stable cutting.
Stepper motor is standard, Servo motor is optional.
Tolerance can keep in 0.005mm, Roughness Ra 0.8. -
KNIFE SHARPENER 220V STAINLESS STEEL MULTI-PURPOSE ELECTRONIC KNIFE SHARPENER
Contact Ushttps://www.cnhfprecision.com/news/5820.html https://www.cnhfprecision.com/news/5927.html https://www.cnhfprecision.com/news/6059.html https://www.cnhfprecision.com/news/6058.html https://www.cnhfprecision.com/news/6415.html https://www.cnhfprecision.com/news/6558.html https://www.cnhfprecision.com/news/6608.html Product Name Knife Sharpener Rated Voltage 220v Power 40W Material Aluminium die-casting housing Color Silver, Red or Customized Certification CE / EU Room Space Desktop, Countertop, Kitchen Applicable Knife Type Work for all steel knives Application 1. patented spring loaded knife2.sharpening wheels with 20 ceramic pins3.electrically driven sharpening …
KNIFE SHARPENER 220V STAINLESS STEEL MULTI-PURPOSE ELECTRONIC KNIFE SHARPENERRead More






Reviews
There are no reviews yet.