High-Performance Automated Vacuum Potting Machines for Bubble-Free Encapsulation
Baolan Vacuum Potting Machines degas material continuously before the chamber and dispense in multiple steps inside it, cutting bubbles in critical encapsulation.

Bubble-Free Vacuum Encapsulation
High-Performance Automated Vacuum Potting Machines for Bubble-Free Encapsulation
Baolan Vacuum Potting Machines combine continuous material degassing with dispensing inside a vacuum chamber to reduce bubbles and support reliable encapsulation quality.
-
Continuous vacuum degassing through Potting Material Preparation Units
-
Sealed vacuum chambers for in-chamber dispensing
-
Multi-step dispensing for complex product structures
-
Four-outlet dispensing heads for multi-part processing
-
Integrated three-axis motion units inside the vacuum chamber
-
Configurable material preparation, metering and automation modules
Suitable Materials: Two-component potting compounds with compatible vacuum-processing conditions
Typical Applications: Electronic components, electrical assemblies, sensors and industrial products requiring low-bubble encapsulation
Product Information
System Type
Automated Vacuum Potting Machines
Material Pretreatment
Continuous Vacuum Degassing
Dispensing Environment
Sealed Vacuum Chamber
Dispensing Head
Four-Outlet Configuration Available
Motion System
Integrated Three-Axis Motion Unit
Process Control
Multi-Step Vacuum Dispensing Process
Customer Challenges
Reduce Bubbles in Critical Encapsulation Applications
Bubbles may originate in the material itself or become trapped in complex product structures during the dispensing process.
Potting compounds can contain trapped air before reaching the dispensing stage. Product cavities, narrow gaps and complex geometries can also trap air as the compound flows into the part.
A vacuum chamber alone cannot address every bubble issue. If the material enters the chamber without sufficient pretreatment, it may release air again under vacuum, causing foaming, contamination and potential changes to the material ratio.
Baolan Vacuum Potting Machines combine continuous vacuum pretreatment with in-chamber dispensing. Potting Material Preparation Units degas the material before it enters the chamber, while multi-step dispensing helps air escape from the product structure during filling.
Product Overview
Integrated Vacuum Processing from Material Preparation to Dispensing
Baolan Vacuum Potting Machines are designed for encapsulation processes where bubble reduction is a critical quality requirement. The system degasses potting compounds under vacuum and dispenses material while the workpiece remains inside a sealed vacuum chamber.
The system can include Potting Material Preparation Units, material transfer units, metering components, dispensing heads, a vacuum chamber, three-axis motion control and workpiece-handling equipment.
Equipment configurations can be selected according to material characteristics, product geometry, dispensing volume, target output and the required automation level.

Core Functions
Key Features
Continuous Vacuum Degassing
Potting Material Preparation Units treat potting compounds continuously under vacuum to reduce trapped air before dispensing begins.
In-Chamber Vacuum Processing
The system dispenses material inside a vacuum chamber to help remove air from product cavities and complex structures.
Multi-Step Dispensing
A staged dispensing process helps air escape as the material fills the product.
Four-Outlet Dispensing Head
A four-outlet configuration can process four products in one working cycle and support higher production output.
Three-Axis Chamber Motion
An integrated three-axis motion unit positions the dispensing head inside the vacuum chamber according to the programmed path.
Configurable Process Modules
Material preparation, feeding, metering, dispensing and automation modules can be configured around the selected process.

Multi-Part Production
Four-Outlet Dispensing for Higher Vacuum Potting Output
Baolan Vacuum Potting Machines can use a four-outlet dispensing head to apply material to four products during one working cycle.
Combined with the three-axis motion unit inside the vacuum chamber, the dispensing head follows the programmed product path while maintaining the required vacuum process environment.
Working Process
How It Works
Potting Material Preparation Units degas the material under vacuum before the system evacuates the workpiece chamber and completes the programmed dispensing process.
Continuous Vacuum Degassing →
Chamber Evacuation →
Multi-Step Vacuum Dispensing →
Product Release
Engineering Capabilities
Why Choose Baolan
Baolan develops industrial adhesive meter, mix and dispense equipment. Our engineering process connects adhesive characteristics, Potting Material Preparation Units, metering principles, mixing methods and automation requirements into one equipment solution.
Frequently Asked Questions
FAQ
Why are Vacuum Potting Machines used?
Vacuum Potting Machines help reduce bubbles in the material and trapped air in the product structure during the encapsulation process.
Is a vacuum chamber alone enough to prevent bubbles?
No. Material preparation is also important. Material that is not sufficiently degassed may release air again inside the vacuum chamber.
Can the system process several products in one cycle?
Yes. A four-outlet dispensing-head configuration can apply material to four products during one working cycle.
How does multi-step dispensing help product quality?
A staged dispensing process gives trapped air more opportunity to escape as the potting compound fills the product structure.
Can Vacuum Potting Machines be configured for a specific product?
Yes. Potting Material Preparation Units, metering components, dispensing-head configuration, chamber size, motion control and workpiece handling can be configured according to the application.
Build a Vacuum Potting Process for Your Product
Tell us your material, product structure, dispensing volume, bubble-control requirement and production target. Baolan will help configure suitable Vacuum Potting Machines for your application.
Related products
-
MA-(3~10MM)×2000MM Steel Coil Slitter
Contact UsMA-(3~10MM)×2000MM Steel Coil Slitter made from Wuxi Mazs machinery is suitable for coil strip thickness (3-10)mm; while strip width is changeable: 600mm. 1000mm, 1250mm, 1600mm, 2000mm and so on.
-
Rotary kiln incinerator
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
BF500C BF630C High Precision Edm Wire Cut Machine
Contact UsRobust frame with “C” mast.
With height adjustable diamond guider.
Four axes independent (X/Y/U/V) work;
Taiwan linear rail, Grade P or H, Ball screw. C2 or C3.
Special Tensioning mechanism for molybdenum wire, keep stable cutting.
Stepper motor is standard, Servo motor is optional.
Tolerance can keep in 0.005mm, Roughness Ra 0.8. -
Used Muratec 861 Spinning Machine
Contact UsThe company was established in Zhangjiagang, Jiangsu, China in 2005 .Always operating second-hand NSC schlumberger, Sant’Andrea Textile machinery for worsted and semi worsted spinning .






Reviews
There are no reviews yet.