Plastic to Plastic (COMY PTP™)
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
COMY leverages its proprietary catalyst to efficiently convert mixed waste plastics into propylene. The process also generates by-products like BTX and liquefied substances, all derived from waste plastics and certified at GRS level. The PTP technology has multiple outstanding advantages.
Low-carbon and Eco-friendly
PTP dramatically cuts carbon emissions vs. petroleum-based products.
Recycling Traceability Certification
All components are sourced from waste plastics, and the production process complies with GRS certification standards.
High-Quality Products
Monomers achieve polymer-grade purity with minimal impurities.
Process
Plastic to Plastic enables the full closed-loop chain-waste plastic to pyrolysis oil to new plastic-within a single facility. All products come entirely from waste plastic, with no fuel oil produced, achieving true "oil-free purification." This means every ton of waste plastic is maximally converted into high-value resins (e.g., polypropylene) instead of being diverted to fuel, with higher recycling efficiency than traditional methods.
Related products
-
Hydrogen from coal gasification
Contact UsIndustrial hydrogen production from coal is good for large-scale hydrogen production or when no other suitable feedstock is available.
-
Methane concentration technology – gas
Contact UsThe company’s proprietary technology developed for low concentration gas, after fully analysing the nature of the raw gas, adopts variable pressure ad…
-
Zwitterionic Polyacrylamide
Contact UsThe zwitterionic polyacrylamide is formed by copolymerization of the cationic monomer, acrylamide monomer, and hydrolysis agent.
-
RTO regenerative thermal oxidizer for removing VOCS
Contact UsRTO is an air pollution control system which collecting the exhausted air through the safety air valve into the oxidation bed with the temperature over 820℃ to oxidation the organic waste gas into carbon dioxide and water.
It is used
1. Industrial and mining conditions with high and low concentrations of organic solvents in the treatment of emitted gases
2. Industrial and mining conditions with requirements for the collection and treatment of unorganized emissions
3. Equipment conditions without waste heat utilization value
Reviews
There are no reviews yet.