Category: Mechanical Equipment & Tool Parts
Showing 129–144 of 186 results
-
Optimizing Multi Rip Saw Multi-rip 450M1/M2/M3
Contact UsMoveable optimizing multi-RIP saw, the saw blade can move according to the board situation, and optimize according to the board width. It will improve the board output yield dramatically.
-
Organic Heat Carrier Boiler
Contact UsThe company specializes in producing various kinds of bends, header boxes, welded pipes, membrane walls, separators and finned economizers for boilers, pressure vessels, electric power and other industries.
-
-
Portable full color life recorder for night vision
Contact UsThe Portable full-color Night Vision Recorder is a multi-functional recording device that combines cutting-edge optical technology and intelligent AI algorithms, breaking through the limitation of tra
-
Post wave soldering AOI for Top&Bottom side
Contact UsPOST WAVE SOLDERING AOI FOR
SOLDER JOINT (BOTTOM SIDE) -
PP PE HDPE LDPE LLDPE Film Waste Recycling Pelletizing Machine Pelletizer Granulator
Contact UsThis is multifunctional small pelletizing line. It is used to recycle various leftovers, such as PP, PE, HDPE, LDPE, PVC, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
PPY plane moving type (comb type) parking system
Contact UsThe PPY plane moving product is the mechanical parking device that uses a carrier to move cars or car boards on the same level to access cars.
-
-
Profile for EDI ultra purified water Treatment
Contact UsUltra purified water was produced form pre-water treatment , Ro water treatment and EDI ionization to remove the conductivity material , resin, suspended solids heavy metal ion and TOC.
-
QUINCY CONNECTOR VIBRA-LOK 142299 1/4 NPT
Contact UsWe are QUINCY CONNECTOR VIBRA-LOK 142299 1/4 NPT supplier and provide replacement parts for major air compressor manufacturers.
-
Ranging Radar Sensor LDRR04
Contact Us● Frequency: 80GHz
● Ranging range: 40 meters
● Measurement accuracy: ±2 mm
● Communication interface: supports RS485 communication method
● Product form: integral radar with housing or separate PCBA (radar sensor)
● Customization service: Support personalized product customization -
RO water Treatment
Contact UsThe reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a pore size of 1/10000 μ The reverse osmosis membrane (RO membrane), which is equivalent to 1/6000 of the size of Escherichia coli and 1/300 of the size of the virus, converts high concentration water into low concentration water. At the same time, it isolates all impurities such as industrial pollutants, heavy metals, bacteria, viruses, etc.
-
RO water Treatment
Contact UsThe reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a p
-
Rotary kiln incinerator
Contact UsRotary kiln incineration systems are widely adopted in the international industrial waste treatment sector, holding an approximate market share of 85% in this field. They are also recommended by China’s Ministry of Science and Technology and the National Environmental Protection Agency as the preferred furnace type in the National Industrial Waste Treatment Technology Policy. These systems can simultaneously handle sludge, industrial waste and waste with high moisture content. Solid waste is conveyed into the rotary kiln where it undergoes moisture evaporation, volatilization, ignition, and complete combustion. Ash residue is discharged through an outlet at the kiln’s tail end, while the generated flue gas proceeds to a secondary combustion chamber. Here, it mixes with secondary combustion air to ensure thorough burning, leading to the safe and compliant discharge of exhaust gases. Key features of rotary kiln incinerators include their broad adaptability to various wastes, ease of operation and maintenance, and extended service life.
-
SA3010 DC Cooling Fan
Contact UsThe SA3010 DC cooling fan, with dimensions of 30x30x10mm,made from durable plastic with a fire rating of UL94V-0, it ensures safety and reliability. The fan features a 5-blade impeller.
-
SAE 100 R9
Contact UsTUBE:OIL RESISTANT SYNTHETIC RUBBER
REINFORCEMENT: 4 HIGH TENSILE STEEL WIRE SPIRAL
COVER: ABRASION AND WEATHER RESISTANT SYNTHETIC RUBBER
APPLICATION: FOR HIGH PRESSURE HYDRAULIC SYSTEMS
TEMPERATURE: -40℃ to +120℃
