DF-03 HT Modified Starch
DF-03 is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 135 ℃). And ensure its good fluid loss performance under both low and high temperature. DF-03 is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 1.0%-2.0%.
Product Description
DF-03 is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 135 ℃). And ensure its good fluid loss performance under both low and high temperature. DF-03 is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 1.0%-2.0%.
Technical Specification DBW DF-03
|
Items |
Specifications |
|
|
Appearance |
White powder |
|
|
Moisture, % |
≤12.0 |
|
|
AV after 140℃ aging, mPa·S |
40 g/l saltwater slurry |
≤8.0 |
|
Saturated saltwater slurry |
≤12.0 |
|
|
FLAPI after 140℃ aging, ml |
40 g/l saltwater slurry |
≤15.0 |
|
Saturated saltwater slurry |
≤20.0 |
|
|
FLAPI in 2% CaCl2 solution, mL |
≤10.0 |
|
Features
Reduce filtration loss effectively.
Increase viscosity slightly.
It is degradable, non-toxic and does not harm the environment.
The operating temperature can reach 135℃.
Resist salt to saturation, reasonable calcium and magnesium resistance. so it can be applied in various drilling and completion fluids.
Good filtration control performance under the condition of both low and high temperature, and has wide applicable temperature range.
It does not contain polymer products,which has little effect on rheology of drilling fluid and does not cause viscidity of drilling fluid
Package and Storage
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.
Related products
-
RTO regenerative thermal oxidizer for removing VOCS
Contact UsRTO is an air pollution control system which collecting the exhausted air through the safety air valve into the oxidation bed with the temperature over 820℃ to oxidation the organic waste gas into carbon dioxide and water.
It is used
1. Industrial and mining conditions with high and low concentrations of organic solvents in the treatment of emitted gases
2. Industrial and mining conditions with requirements for the collection and treatment of unorganized emissions
3. Equipment conditions without waste heat utilization value -
Solid-liquid incinerator project for Ningxia
Contact UsThis project is a 10,000 tons/year hazardous waste incineration device for Ningxia, which is used for incineration and treatment of hazardous waste produced by our factory.
-
KSZ-3.0D1/D2 welding exhaust hose
Contact UsKSZ-3.0D1/D2 welding exhaust hose Features:
● High efficiency custom aluminum impeller
● Self-supporting & self-positioning suction hood
● Durable flexible suction arm, high temperature resistance & flame retardant & abrasion resistance
● Easy to replace and clean filters, no frequent maintenance is required
● Imported filter material with high precision filtration
● Special designed dust cleaning device, automatic blow-back cleaning
● Siemens PLC smart control system, more intelligent and energy saving
● Integrated automatic fire extinguish system -
KSDM-4.0 Downdraft Grinding Dust Collector
Contact UsFeatures:
● Low noise
● Stable performance
● Easy operation and use High purification efficiency
● Meeting indoor emission standards Reasonable structure design
● Low resistance loss
Reviews
There are no reviews yet.